EAS Stop Lock Key SLK020 for Hook Locks and StopLocks

What is an EAS stop lock key?

A EAS stop lock detacher is a device that uses the magnetic principle to open stop locks.

The working principle of EAS magnetic detacher

We may notice in life when shopping in the supermarket or buying clothes in the payment, the cashier took a cylinder like something to the commodity anti-theft hard tag, the label opened, many people do not know what that is, in fact, that is the hard tag detacher, so how it is the anti-theft magnetic buckle easily open it? Today we will take you to understand how it works.
We have to first understand the hard tag (anti-theft magnetic tag) working principle, hard tag more for the buckler and buckle nail two parts, the nail rod with two pairs of small grooves, when the nail from the bottom of the anti-theft magnetic buckle inserted, the buckle in a few small steel beads will slide into the nail on the location of the groove; and the steel beads above the iron ring under the pressure of the top spring, firmly stuck them in the groove. So to pull the nail out from the bottom again, the general brute force is not to do, and then the role of the EAS magnetic detacher will appear.
Hard tag detacher generally consists of magnetic ring and magnetic core, the combination of the two form a vortex magnetic force, the magnetic force is concentrated in the center of the opener, the tension formed at this time can reach 8500GS, the general domestic ordinary magnetic buckle with 4500GS force can be opened, but also some customers special customized strong anti-theft hard tag requires 1200GS force to open, then it is necessary to use the corresponding The strong detacher to unlock the label operation.

How to unlock the tag

How to properly unlock the soft label?

As a cashier in a shopping mall, he or she must be responsible for the customers, which requires every cashier to do: the goods must be 100% decoded after the purchase order, and the common anti-theft tags in supermarkets are soft labels and hard tags.
First of all, we will explain the correct decoding operation of soft labels, the general decoding tool of soft labels is decoder (demagnetizer), and the operation requirements are as follows.

• 1. First determine the location of the induction tag on the goods. If the tag is placed concealed, the reference mark should be determined. Then scratch the side of the commodity with label or reference mark as close as possible to the surface of the decoder plate to ensure that the label can pass through the effective decoding area. (Most non-contact decoder decoding area is within 10cm from the surface of the decoder)
• 2. Soft label decoding must pass through the decoding board horizontally and require all six sides (for large hexahedral goods) to pass through the decoding board horizontally, in order to avoid a “dead corner” between the decoding board and soft label, and to reduce the number of passes only after the cashier has mastered the decoding angle.
• 3. The decoding speed is controlled at one product per second, not too fast, otherwise the label decoding may not be complete.
• 4. When the soft label is decoded by the decoding board, the system alarm is caused by the detection antenna when the customer leaves, which means that the decoding is not successful, it may be a mistake of the cashier in decoding; but if this situation occurs continuously, the supervisor should be informed in time, which means that the decoding equipment is faulty.

How to properly release the security hard tag?

The tool for releasing hard tags is the anti-theft hard tag detacher (unlocker), and the specific operation requirements are as follows:

• 1. Hold the label on the commodity with your left hand, with the front side facing up and the protruding part aligned with the recessed part in the center of the lock picker.
• 2. Let the label stick close to the protruding part of the anti-theft hard tag detacher (opener) in the pit, with the right gently press the nail on the hard tag, and then pull outward with the goods. At this point, the product can be separated from the hard tag. The nail is then removed. 3.
• 3. Open the label from the anti-theft hard tag detacher, the label staple from the goods.
• 4. Remove the hard tag and nail are placed separately and can be properly stored for secondary use, do not put randomly, so as not to cause interference with the equipment, false alarms occur.