产地。 | 中国浙江 | 尺寸。 | 50*50mm |
品牌名称: | 敏捷/RHT | 颜色。 | White/clear/customized |
型号。 | HFL47 | Feature: | Water-proof |
频率。 | 13.56 MHz (High Frequency) | 申请。 | 不同的零售商店、购物中心、超级市场 |
徽标: | 接受定制的标志 |
包装和交付
- 销售单位。单一项目
- 包装类型。 20000pcs/ctn
交付时间:
数量(箱) | 1 - 100 | >100 |
估计数。时间(天) | 15 | 有待商榷 |
产品介绍
What is a high frequency RFID label?
High frequency RFID label is a kind of RFID technology, the operating frequency is 13.56MHz, the wavelength of the frequency is about 22m.
Generally passive-based, the labels work when the number of exchanges must be in the near-field area of the RFID reader antenna radiation. High-frequency labels can be easily made into card-shaped, widely used in electronic identity cards, electronic locking anti-theft (electronic remote control door lock controller), electronic tickets, building access control system, community property management, jewelry inventory management, intelligent shelf management, fixed assets management system, library management system, etc.
UHF labels work at frequencies between 860MHz-960MHz, and can work with different antennas, and can be divided into two categories: active labels and passive labels. When working, the RF label to be in the far field area of the UHF reader antenna radiation field, RFID labels and the coupling between the way for electromagnetic coupling. UHF reader antenna radiation field for passive labels to provide radio frequency energy, will be passive labels wake up. The corresponding radio frequency identification system reading distance is generally greater than 1 meter, the typical situation is 4 meters ~ 6 meters, the maximum can be more than 10 meters. Reader antenna is generally directional antenna, only in the reader antenna directional beam range of radio frequency label can be read/written. UHF label because reads the distance far, transmits the data rate fast, is widely used in the railroad vehicles automatic diagnosis, the container diagnosis, also may use in the highway vehicles diagnosis and the automatic charge system.
The characteristics of high-frequency electronic label and UHF electronic label.
The high frequency label is cheaper than the UHF label, penetrates the non-metal object force strong, the working frequency is not subject to the radio frequency control constraint, is suitable for the object which contains the water component higher, for example the fruit and so on.
UHF label is more expensive, label recognition sensitivity is high, can be read by multiple labels, the role of a wide range, transmission data speed, energy consumption, penetration force is weak, operation area can not have too much interference.
包装和运输
防盗系统的工作方法
电子标签分为 防盗软标签 和 防盗硬标签.防盗软标签也叫防盗贴,防盗硬标签也叫防盗扣,常被用于服装和超市。防盗贴成本低,是直接贴在 "硬 "货物上的,软标签不能重复使用;防盗扣的一次性成本比软标签高,但可以重复使用。防盗扣必须配备一个特殊的 拆卸者,主要用于柔软和穿透性强的衣服。大多数 停用者 是具有一定解码高度的非接触式设备。当收银员收银或装袋时,不用接触消磁区就可以对电子标签进行解码。也有将解码器和激光条码扫描器结合在一起的设备,这样可以一次性完成商品采集和解码,方便收银员的工作。这种方法必须与激光条码供应商配合,消除两者之间的相互干扰,提高解码灵敏度。检测器一般为商场出入口或收银通道的检测系统装置。收银员在收到顾客对商品的正确付款后,可以通过中和粘贴在商品上的标签来授权商品并合法离开指定区域。当未打码的商品被带离商场时,经过检测装置(多为门形)时,会触发报警,从而提醒收银员、顾客和商场保安人员及时处理。
防盗检测步骤
- 1.将防盗软标签贴在商品上。
- 2.安装 EAS防盗天线系统 在商场的出口通道或收银通道。
- 3.付款后,货物通过一个特殊的停用器,使标签解码无效或解锁并去除标签。
- 4.当未付款的货物(带标签)通过出口时,门口的探测器检测到标签并发出警报,拦截货物出去。
在超市中使用防盗标签的注意事项
- 1.防盗软标签必须贴在商品上,以保护商品。
- 2.防盗软标签必须以不损坏货物为原则进行放置。
- 3.防盗软标签不能直接贴在金属和锡纸商品上。
- 4.4. 防盗软标签不得重叠(超过两个)和粘贴。
- 5.防盗软标签的粘贴位置应尽量平整,粘贴时的弯曲弧度应尽量小,不得折叠。最好不小于120度,并应粘贴牢固。
- 6.软标签是一次性的,不能重复使用。它应该用射频消磁器进行解码。
微信
用微信扫描二维码