产地。 | 中国浙江 | 输入电压: | 100~240VAC,50~60Hz |
品牌名称: | 敏捷/RHT | Insurance of main power: | 5A 250V |
型号。 | EC-FD2 | 电台 频率。 | 58Khz |
产品名称。 | EAS调幅系统 | 检测宽度: | 50mm magnets stick pencil tag, 180cm |
颜色。 | 白 | 天线材料: | PVC |
尺寸。 | 160*60*2cm | Work Mode: | 2 antennas+1 master controller |
Alarm Mode: | Sound Alarm | Working Tag: | AM hard tag, DR label |
包装和交付
销售单位。单一项目
包装类型。
Ctn Size:
Antenna: (80x60mm)82x10x68mm;(160x60mm)162.5x10x68mm;
Master controller: 45×27.5x15CM.
G.W:
4kgs/ctn,7.6kgs/ctn,4kgs/ctn paper carton.
数量(件) | 1 - 50 | >50 |
估计数。时间(天) | 15 | 有待商榷 |
产品介绍
种类 EAS天线
收发器EAS天线
收发器EAS天线是单一的天线,既是磁场输入的创造者,又是磁场输入的接收器。使用收发器天线的EAS系统是最便宜的系统。它们的广播高度通常为一米(有效长度为39英寸,一个单元可以覆盖一个典型的门。两台设备可以很容易地保护一扇双门,如果间隔适当,两台设备也可以覆盖商场环境中4米的开口。由于这些设备可以广播和接收,它们通常在所有方向上广播和接收,因此,有标记或有标签的商品不能放在离Insta内置天线太近的地方。射频和调幅EAS系统都可以使用收发器天线。这些是目前市场上最流行的设备,有各种形状,包括流行的INEO透明丙烯酸系统,看起来非常现代和优雅。
多天线EAS系统
最常见的多天线EAS系统的形式是单通道双天线EAS系统,即用一个以上的天线来形成通往商店入口的通道。其中一个天线是发射器,另一个是接收器。天线在它们之间产生一个低频无线电波场,这样,贴有标签的商品就会通过这个场,天线就会感应到商品上的标签或标识并发出警报。
单通道双天线系统用于商店门口超过一米(36英寸),因此太宽而无法使用EAS收发器系统的情况。由于无线电波场的焦点在天线之间,这种类型的EAS系统允许在2米(72英寸)内放置带有标签的商品作为EAS系统的一部分。
当门洞超过2米(72英寸)时,要安装额外的EAS系统天线,以在门洞的宽度上形成额外的通道。
58khz AM Underground Buried EAS System | |||
Name | AM Underground Buried EAS System | ||
材料 | PVC | ||
Input Voltage | 100~240VAC,50~60Hz | ||
Working Frequency | 58Khz | ||
Insurance of main power | 5A 250V | ||
Current value | 2A | ||
Input power | Lower than 200W | ||
Output | 2 output port | ||
Duration of transmission pulse | 1.6ms(conventional peak current is 16.0A) | ||
Impulse frequency | 37.5Hz(50Hz AC),45Hz(60Hz AC) |
A brand new intelligent EAS security system of highly value for money. Its design of invisible installation is greatly satisfied with the requirements of open-ended stores.
The induction coil is fully buried under the floor.has no effect with the shop’s environment.with its invisible design and its excellent properties of security at the same time.
优势
- Buried underground, no affect to the store’s decoration;
- Concealed installation,does not affect the store decoration;
- Independent external alarm, can use sound and light alarm;
- Advanced selt-detect function, Effectively identify and filter jamming source, zero false positives;
- Wide detection range;
- Suitable for all the high-end retail malls.
Comment:usually detection height of soft labels is 100cm,maximum detection height of 50mmbar hard tags is 150-180cm.Bury the induction coils under the floor,The invisible induction coils only can be embedded before the ground is floored.
Power requirement of the controller:supply line must be supported by an independent distributor box,please make sure the electric line is grounded properly.when there are 2pieces above of equipments work together,please ensure they share the same circuit.
ǞǞǞ master controller should be installed up onto the ceiling.This kind of am system provides a flexible and convenient installation to those stores have no an accessible way to set up a traditional system.Its fully invisible design has no effect to shop’s environment and also has good contribution to enhance the shop’s space.
Buried am system has strict requirements to setting environment,the setting should be prepared before flooring.Please seek for further solution form our marketing staff.
Pay attention
- Keep electric cables away from the pedestal, such as power cables, network cables.
- The EAS systems must not share a power point with any other equipment.
- Do not install EAS system near elevator or electricity box.
- Keep metal 2m away from the pedestal. It includes metal shelves, metal racks and foil etc.
- Keep product with tag 2m away of the pedestal.
Standard Packing Ways | 1pc/ctn |
Packing Size | Antenna: (80x60mm)82x10x68mm (160x60mm)162.5x10x68mm master controller:45×27.5x15CM |
Packing Gross Weight | Antenna:4kgs /7.6kgs master controller:4kgs |
Delivery | 3-7Days After Receive |
微信
用微信扫描二维码