EAS RF/AM Spider Wrap SW016

EAS Anti-theft hard tags have a stable alarm function that adheres firmly to the product and lasts longer. Hard tags are very durable and can be reactivated for repeated use. It is mainly used in various scenarios such as supermarkets, clothing stores, tool stores, etc. It can be used for liquid and metal packaging to effectively reduce theft losses, increase store profits and improve the shopping experience.

What is a spider wrap?

First of all, Anke will give you a brief introduction to the spider tag. The appearance of the spider tag is a hard tag, which is completely different from other ordinary hard tags. The shape of the spider wrap is usually circular. spider wrap, there are four anti-theft ropes that can be extended. The length of the four anti-theft ropes can be adjusted to 3 meters, 6 meters and 8 meters. The customization time is longer, so it can be used to steal very large items.

There are two types of frequencies, one is am type – 58khz, the other is RFID type – 8.2MHz, which are suitable for the same type of EAS system. Customers can customize their favorite colors. Black and white are common. From the perspective of alarm methods, they can be divided into three types: one is alarm, one is double alarm, and the other is three-level alarm. One kind of alarm is antenna alarm. Double alarm means that if someone picks up the goods without paying and does not remove the additional spider tag, when they pass through the antenna, the antenna will alarm, and the spider tag itself will alarm, so the spider wrap is also called self alarm tag; If someone cuts off the safety line, it will also alarm.
Secondly, Anke will introduce the performance characteristics of spider wrap, which is made of high-strength ABS engineering plastic and combined with special anti-theft coil. Therefore, it is durable, high sensitivity and long service life. It can be widely used in department stores and other related products. Fashionable and generous, humanized design; With long battery life and high DB alarm, it can effectively remind the clerk, and then fully protect the goods in the store.
Generally, there are few spider labels, because the cost is much higher than ordinary labels. Therefore, spider labels are generally used in very expensive electronic products or other high-priced products with large packaging.

Frequency: 8.2MHz RF Hard Tag / 58khz AM Hard Tag
The clothing anti-theft button adopts the new ABS engineering plastic shell, the high quality coil, the high quality magnetic rod, the high quality internal accessories. All the accessories of the clothing anti-theft button are strictly tested, the anti-aging performance is strong, the antirust performance is strong, the anti rust performance is excellent, the high Q value, the detection rate is high, the service life is very long.
Advantages: 8.2MHz series / 58KHz series EAS anti-theft hard tag has stable quality and superior performance. It is suitable for all 8.2mhz/58khz decoding systems and detection systems produced by various manufacturers.

Application: supermarkets, clothing stores, shopping malls, hypermarkets, mother and baby stores, jewelry stores.

How to Use a Spider Wrap?

• 1. Use spider wrap, open it and release the protective wire in the direction indicated by the arrow.
• 2. Put the articles into the net bag and make the protective line evenly distributed on both sides of the product.
• 3. Tighten the protective wire to fit the goods, but not too tight, and then press the switch to start the label;
• 4. Open the label by removing the spider bag, close to the remover suspension switch, and the label stops working (if the rope must be broken, it will trigger an alarm).
• 5. After installation, the goods shall be placed in a correct way to avoid damage to the goods. Then achieve the good effect of protecting the goods.

How do you loosen spider wraps?

Pull the male end completely out of the buckle and set it aside for now. Remove the product from the spider wrap. Once the male end is removed, the wires will loosen. You should be able to easily slip the product out of the spider wrap.

How do I remove a spider wrap?

Spider wraps require a magnet, I would recommend a golf detacher to be safe. Cutting the wires will trigger an alarm, either silent or aloud. But a magnet is how an employee would remove them so that’s how they’re designed to unlock. But for the big spider wraps, stick the teeth in the holes. The flat magnet part needs to be on the majority of the back of the spider wrap. Then, it is basically pointing where you need to push. So you push in at the front of the magnet, and then it will pop out.