EAS RF/AM Self-alarming Tag SA018

What is a self-alarming tag?

The appearance of the ordinary electronic self-alarming tag is very similar to that of the general magnetic hard tag, but it is larger than the magnetic hard tag. The difference between it and the ordinary hard tag is that it has a dual anti-theft alarm function. First of all, the self sounding hard tag itself has magnetism and alarm frequency. Its function is the same as that of the normal tag. Once it is attached at the exit, it will alarm. Secondly, it has the function of wire break alarm (pull nail alarm). Button battery and mini alarm are installed in the tag. Therefore, once the anti-theft rope is cut or pulled, it will automatically alarm immediately. It will alarm immediately without the attachment of alarm antenna. The anti-theft function is very effective. However, because the price is higher than that of ordinary hard tags, this self-alarming tag is generally used for the installation of high-priced goods.

Electronic tag alarm the emergence of electronic tag has raised the anti-theft level of EAS to another level. In addition to the detection and induction of conventional hard tag, the tag has alarm function, which can quickly attract the attention of shop assistants and reduce the theft rate. After years of market inspection, the electronic tag has proved to be a reliable electronic alarm product with stable performance, In particular, rope tags can avoid damaging clothes.

Frequency: 8.2MHz RF Hard Tag / 58khz AM Hard Tag
The clothing anti-theft button adopts the new ABS engineering plastic shell, the high quality coil, the high quality magnetic rod, the high quality internal accessories. All the accessories of the clothing anti-theft button are strictly tested, the anti-aging performance is strong, the antirust performance is strong, the anti rust performance is excellent, the high Q value, the detection rate is high, the service life is very long.
Advantages: 8.2MHz series / 58KHz series EAS anti-theft hard tag has stable quality and superior performance. It is suitable for all 8.2mhz/58khz decoding systems and detection systems produced by various manufacturers.

Application: supermarkets, clothing stores, shopping malls, hypermarkets, mother and baby stores, jewelry stores.

How to Use EAS RF hard tags?

The security tag consists of a rigid housing that contains a transmitter. This transmitter is in constant communication with an antenna protecting the entrance to the store.

1. The security tag is attached to the item using a pin that passes through the product fabric. The pin is then locked into the security tag.
There are two common locking mechanisms used in security tags – mechanical and magnetic locks.
In the case of magnetic locks, there are different strengths available, from standard to superlock, superlock and multipole. The higher the magnetic strength, the more difficult it is to remove the tag illegally, and SuperLock is the recommended minimum magnetic strength.
Also, security pins should have a large enough tip to ensure that they are not forced through the fabric of the attached item, and there is a range of available pin sizes.
Security tags also come in a variety of shapes, which also affects the difficulty of removing them illegally.
These shapes include round, square and pencil-shaped tags. Round tags with pins (or flip-top tags) correspond to the size of the tag and are considered one of the most difficult tags for store pickpockets to remove. They are more difficult to force open because there is little surface area available for purchase and the pin cannot be forced through the product without causing visible cuts or tears.
Also, hard tags can be secured to items such as handbags and shoes with steel cables, and bottles and eyeglasses can be secured to products with specially designed hard tags.
2. Removal of security tags
When the product is sold, the security label needs to be removed. This simple process is performed using a separation device mounted on the point-of-sale counter. Whether it is a mechanical device or a high-powered magnet, the remover releases the security tag’s locking mechanism and allows the tag to be removed. The tag can be reused on other products.