Lettore RFID LF mini USB LFR01

Imballaggio e consegna

• Unità di vendita: Articolo singolo
• Tipo di confezione: 15*10*5cm

Tempi di consegna:

Descrizione dei prodotti

What is RFID reader?

RFID reader (abbreviation of Radio Frequency Identification) is also known as “RFID reader”, that is, wireless radio frequency identification, through the radio frequency identification signal automatically identify the target object and obtain relevant data, without human intervention, can identify high-speed movement of objects and can simultaneously identify multiple RFID tags, fast and convenient operation. RFID reader has fixed and handheld, handheld RFID reader contains low frequency, high frequency, UHF, active, etc.

RFID reader (RFID reader) through the antenna and RFID electronic tags for wireless communication, can realize the tag identification code and memory data read out or write operation. A typical RFID reader contains RFID radio frequency module (transmitter and receiver), control unit and reader antenna.
RFID technology is used in many industries, such as logistics and warehouse management, anti-counterfeit traceability, industrial manufacturing, ETC, etc. Especially after the concept of Industry 4.0, RFID readers are widely used in the manufacturing industry.
RFID read-write in the manufacturing industry use, with RFID electronic tags in production, transportation, and warehouse management increasingly prominent. In production link instead of barcode scanning, realize automatic data collection; Material pull link with AGV trolley transportation; Warehouse link management goods in and out, inventory, etc.
Highway electronic toll collection system ETC (Electronic Toll Collection abbreviation) in, read-write is defined as RSU (Road Side Unit), that is, road side unit, read-write vehicle unit OBU (On Board Unit).
RFID reader is applied in the management of the car park to realize the identification of the vehicle to discriminate and deduct the fee automatically. If use long-distance range RFID read-write, then can realize not stop, no card fast channel, or no one guard channel, or no one electronic detection vehicles in and out of the situation.

Working principle of Lettore RFID

RFID reader (read-write) through the antenna and RFID electronic label carries on the wireless communication, may realize to the label recognition code and the memory data reads out or writes the operation. A typical reader contains a high frequency module (transmitter and receiver), control unit and reader antenna.
Among them, the electronic label is also called the radio frequency label, the transponder, the data carrier; the reader is also called the readout device, the scanner, the communicator, the read-write (depending on whether the electronic label can rewrite data wirelessly). Between the electronic label and the reader through the coupling element realizes the radio frequency signal space (no contact) coupling, in the coupling channel, according to the time sequence relationship, realizes the energy transmission, the data exchange.
Occurs between the reader and the electronic label RF signal coupling type has two kinds.

• (1) inductive coupling. Transformer model, through the space of high-frequency alternating magnetic field to achieve coupling, based on the law of electromagnetic induction.
• (2) electromagnetic backscattering coupling: radar principle model, launch out the electromagnetic wave, encounter the target after reflection, while carrying back the target information, according to the electromagnetic wave space propagation law.

Vantaggi di Lettore RFID

RFID reader as an essential part of the application system, its selection is correct or not will be related to whether the customer project can be implemented smoothly and the implementation cost; in the reader selection is best after a strict process to ensure the success of the project.

• Firstly, need to pay attention to the frequency range of the reader equipment, see whether it meets the frequency specification of the project use place.
• Second, understands the read-write’s maximum transmitting power and the matching selection antenna whether the radiation exceeds the standard.
• Third, see read-write has the antenna port quantity, according to the application whether needs the multi-interface read-write.
• Fourth, whether the communication interface meets the demand of the project.
• Fifth, understand the reading distance and anti-collision indicators, reading distance indicators to be clear what antenna and tag under the test; anti-collision to be clear what tag in what arrangement under how long all read;.
• Sixth, an RFID application system in addition to read-write related, but also with the label, antenna, be labeled items material, be labeled items movement speed, the surrounding environment and other related, in determining the equipment before the best way to simulate the field situation for testing and verification, to ensure that the product can really meet the application requirements;
• Seventh, simulate the situation under continuous testing of the stability of the equipment to ensure that it can work stably for a long time.
• Eighth, to see if the development materials to meet the system development needs, it is best to support the system you are using, and preferably the relevant routines, if not, when the development time will be very long, or even the development does not go on.

How does a RFID reader work?

Let us first explain the basics of RFID. RFID systems basically use 3 components: tags, antennas, and readers. The tag is usually attached with the object. It contains a unique identifier. The antenna detects the tag by the magnetic field it generates. The reader receives the tag information and processes that information. The tag information can be, for example, an identification number. This article focuses on RFID readers.

Is RFID the same as NFC? Or what is the difference?

No, RFID and NFC are not the same. RFID stands for Radio Frequency Identification, and NFC is short for Near Field Communication. However, you can say that NFC tag is a form of RFID.
The distance of NFC is shorter than RFID.
NFC can be used in different ways, such as paying with a smartphone or smartwatch.
RFID can be used to store and send information in one direction, but NFC can be used in 3 different ways.

• NFC tag (passive mode).
• NFC tag (active mode).
• Between NFC tags (peer-to-peer).

Can my phone be used as an RFID tag?

Yes, you can use your phone as an RFID tag. For Android or Windows phones, you can enable NFC. for Apple, you need to enable Bluetooth. Traditionally, RFID tags are smart cards, badges, tickets or drop-shipping. Today, smartphones can also be used as RFID tags.

Where are RFID readers used?

Examples of situations where RFID readers can be used.
Using a tourniquet to enter a building or approach a door.
Identifying yourself on a company computer.
Releasing a print job from an MFP, called a security release.

• To identify the driver in a rental car or shared company car.
• To safely start a machine.
• To charge an electric vehicle, such as a car or motor.
• To buy a piece of candy from a vending machine at school.

Can RFID readers also write?

Although the term RFID reader is widely used, RFID readers can actually write new information on RFID tags as well. Of course, this may have obstacles.

What is the maximum read range of passive RFID readers?

Of course it depends on the specific situation, but in general, RFID tags can be read from a distance of 8 meters, while NFC tags can be read from a distance of up to 10 cm. The strength of the antenna determines the maximum reading range, and of course the environment in which the RFID reader is installed.

If you are talking about RFID readers, what are the latest trends?

Traditionally, RFID readers are used for secure printing. However, the scope of application is much wider:

Solution of contactless authentication

Because of COVID-19, the company is looking for more and more non-contact solutions, especially if more people use the same reader to authenticate.

Move voucher

More and more companies do not want to rely solely on smart cards to enter their offices or facilities. The company would rather stop using the key card system and use mobile access instead. Smart phones are not easy to forget, more secure, and provide the possibility of adding additional security layers, which is called multifactor identification.

Multifactor identification

As hackers use blackmail software to hijack companies as hostages, the need to make the company’s network and computers connected to it more secure has greatly increased. Adding an RFID card reader as an additional authentication means to a PC, for example, can reduce the possibility of computer hacker attacks. Two factor identification is a form of multi factor identification, which means that two of the following factors are met:

• 1. Some information you know, such as password or user name.
• 2. You are designed for biometrics.
• 3. What you have: this may be a key card, smart phone, trusted device or other hardware token.

D: Lei è un'azienda commerciale o un produttore?
R: Siamo un produttore di etichette EAS da oltre 8 anni a Zhejiang, benvenuto a visitarci.
D: Qual è il vostro MOQ?
R: Qualsiasi quantità è accettabile per il suo ordine. E il prezzo è negoziabile per grandi quantità.
D: Se i campioni sono gratuiti?
R: Sì, la maggior parte dei campioni è gratuita, ma non copre i costi di trasporto. 
D: Qual è la capacità di produzione della sua fabbrica?
R: 700 milioni di etichette all'anno.
D: Se ordino una grande quantità, qual è il buon prezzo? 
R: Faremo riferimento al numero di articolo dettagliato, alla quantità, al colore e le proporremo il nostro miglior prezzo.
D: Qual è il tempo di consegna?
R: In gereale, 7-15 giorni dopo il pagamento.
D: E il termine di pagamento?
R: In base ai suoi ordini dettagliati, gli ordini generali sono 100% T/T in anticipo.
D: Perché scegliere Actility? Ci sono vantaggi? 
A:

• 1. Vantaggio reciproco: siamo una fabbrica, il nostro prezzo sarà più conveniente a parità di qualità. 
• 2. Ordine misto: Accettiamo ordini misti, modelli diversi e ordini di piccole quantità. 
• 3. Servizio post-vendita: Resta in contatto con il cliente in qualsiasi momento.

D: Come si comporta la sua fabbrica per quanto riguarda il controllo di qualità?
R: La qualità è prioritaria. I nostri cartellini/etichette sono testati 100% e il certificato CE è approvato.