EAS RF varkaudenestoantennijärjestelmä EC-506

Tuotteet Kuvaus

Types of EAS antennas

Transceiver EAS antennas

Transceiver EAS antennas are single antennas that act as both a creator and a receiver of magnetic field input. EAS systems that use transceiver antennas are the least expensive systems. They typically broadcast up to one meter high (with an effective length of 39 inches, one unit can cover a typical door. Two units can easily protect a double door, and if properly spaced, two units can also cover a 4-meter opening in a mall environment. Since the units broadcast and receive, they typically broadcast and receive in all directions, so marked or tagged merchandise cannot be placed too close to the insta built-in antenna. Both RF and AM EAS systems can use transceiver antennas. These are the most popular devices on the market today and come in a variety of shapes, including the popular INEO clear transparent acrylic system, which looks very modern and elegant.

Multi-antenna EAS systems

The most common form of multi-antenna EAS system is the single channel dual antenna EAS system, where more than one antenna is used to form the channel to the store entrance. One of the antennas is the transmitter and the other is the receiver. The antenna generates a low frequency radio wave field between them so that labeled merchandise passes through this field and the antenna senses the tag or label on the merchandise and sounds an alarm.
The single channel dual antenna system is used where the store doorway is more than one meter (36 inches) and therefore too wide to use the EAS transceiver system. Since the focus of the radio wave field is between the antennas, this type of EAS system allows for the placement of merchandise with tags or labels within 2 meters (72 inches) as part of the EAS system.

When the door opening exceeds 2 meters (72″), additional EAS system antennas are installed to create additional channels across the width of the door opening.

Product Function:

1. Using advanced digital technology to perform signal processing,which is stong anti-interference.

2. Modulating frequency to transmitter and receiver correspondingly ,which strengthened the anti-interference ability to stagger the frequency in the complex environment.

3. Increase sensitivity automatically adjust function,No need debug.

4. Increase still tag exclude function.When there is still have some tag inside the detect area,the antenna will exclude this signal;then other tags pass the area ,the antenna still work properly..

5. Increase the power protection function,if you made mistake when you connect the power’s positive and negative,will not cause any damage to the motherboard and power,power error indication red light, Re properly connect the power supply will be able to work properly.

 This product Installed at the shop exit door to Anti-theft,usually it’s detecting range can reach to:

• 1. Soft Label: 0.8m-1.2m
• 2. Small Tags: 1.2m-1.6m
• 3. Big Hard Tags: 1.5m-2.2m